English Manual
English 26
♦ Default Gateway: The default value is 192.168.100.10
♦ DNS Server: The default value is 192.168.100.10
< Wireless Setup>
♦ Wireless LAN: The default value is “Enable”.
Embedded AP SSID: SSID string,max. Length is 32 bytes.
♦ Connect to Existing AP: This is “AP client” mode feature. By this feature you can join
others Access Point via wireless.
First, enter the existing AP’s SSID and require security key in “Existing AP SSID” and
“Key”, then reboot your system. After these steps, WPS will connect to this AP by
wireless automatically.
Note: The default value of AP client mode is “Disable”, and LAN function will be
disabled during AP client mode.
♦ Region: default value is “Worldwide”.
♦ SSID Broadcast: The default value is “Enable”
♦ Channel: to set fixed channel or Auto. The “Auto” means after power on WPS, it will
scan all of wireless channel and select clear one channel automatically.
♦ Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit or 128bit in
ASCII or HEX string.
♦ Key: If Encryption is enabled, you have to set key value according to the encryption
mode you selected.
< Gatekeeper>
Gatekeeper is designed for ensuring the enterprise network security within WPS box
♦ All Block can block Guest Users(through wireless) to access all office network(LAN),
♦ All Allow can pass Guest Users(through wireless) to access all office network
♦ Internet Only can block Guest Users (through wireless) from office network (LAN) but
still reserve internet connection capability.
<Apply >: press button to select this mode.
<Cancel>: press button to abort action.
<Back>: Back to Operating mode main menu.
iii. OSD Setup
Click [OSD Setup] button, to change OSD standby image.
Commentaires sur ces manuels