Lindy 21733 Guide d'installation télécharger pdf (Page 2)

Tested to comply with FCC Standards

For Home and Office Use

English Manual

The

LCD KVM Terminal Basic

1. Check the packaging content if

everything is included.

2. Switch off all devices

before beginning

The distance between front and rear 19

Packaging Contents

1. LCD Terminal

2. Front and rear mounting rails,

and rear fixing bracket

IEC power supply with mains cable

This quick installation guide & manual

Installation

1. Slide the

fixing bracket over the rear mounting rail with the bracket pointing to the front and the

mounting rail into the front rail and install them into

the L bracket points to the middle and the LCD Terminal can be laid on th

front 19’’ screw free.

2. Slide the LCD Termin

al on the brackets and fix it with the upper front 19

Additionally attach

the fixing brackets to the back to the LC

this prevents

the terminal from sliding out or falling down the rack.

Connect the power supply,

the KVM system cable and

cable supports USB as well as PS/2 connections

Operation

Keyboard as well

as touchpad can easily be taken off

connected by standard USB cable. To take out the keyboard push it up through the hole on the base

Terminal. You may also connect other USB mouse and Keyboard to t

USB-PS/2

multi protocol devices if PS/2 support is required.

When connecting

KVM switches with PS/2 interface incompatibilities may occur. If this happens please use a

different KVM switch, recommended

to be operated in combination with LINDY KVM Switch Classic (PS/2 version).

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Products

In 2006 the European Union

introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic

equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must e

recycling process. E

ach individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please

follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from

WEEE recycling agency.

-ELEKTRONIK GMBH - 2

Tested to comply with FCC Standards

Nos.: 21730 (DE), 21731 (IT), 21732 (FR),

21733 (UK), 21734 (CH), 21735 (US), 21736 (PT)

Single Rail LCD Terminal Basic

Quick

Installation

LCD KVM Terminal Basic

can be easily installed by a single person.

everything is included.

before beginning

the installation.

The distance between front and rear 19

’’ rails must

be between 56.5cm and 85cm.

and rear fixing bracket

for left and right side

IEC power supply with mains cable

This quick installation guide & manual

fixing bracket over the rear mounting rail with the bracket pointing to the front and the

mounting rail into the front rail and install them into

the designated position of

the L bracket points to the middle and the LCD Terminal can be laid on th

al on the brackets and fix it with the upper front 19

the fixing brackets to the back to the LC

Terminal using the

the terminal from sliding out or falling down the rack.

the KVM system cable and

then

switch on the devices. The KVM system

cable supports USB as well as PS/2 connections

, but not at the same

time. Do not

as touchpad can easily be taken off

the Terminal and be rep

connected by standard USB cable. To take out the keyboard push it up through the hole on the base

Terminal. You may also connect other USB mouse and Keyboard to t

he USB receptacles. In this case use

multi protocol devices if PS/2 support is required.

KVM switches with PS/2 interface incompatibilities may occur. If this happens please use a

with USB interface.

The LINDY LCD KVM Terminal Basic is not designed

to be operated in combination with LINDY KVM Switch Classic (PS/2 version).

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Products

introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic

equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must e

ach individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please

follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from

EDITION (March 2012)

Nos.: 21730 (DE), 21731 (IT), 21732 (FR),

21733 (UK), 21734 (CH), 21735 (US), 21736 (PT)

Single Rail LCD Terminal Basic

Installation

Guide & Manual

can be easily installed by a single person.

be between 56.5cm and 85cm.

fixing bracket over the rear mounting rail with the bracket pointing to the front and the

rear

the designated position of

your 19’’ rack, so that

brackets. Leave the upper

al on the brackets and fix it with the upper front 19

’’ screws to the rack.

Terminal using the

included (2x) screws,

switch on the devices. The KVM system

time. Do not

connect both kinds!

the Terminal and be rep

laced. They are internally

connected by standard USB cable. To take out the keyboard push it up through the hole on the base

of the

he USB receptacles. In this case use

KVM switches with PS/2 interface incompatibilities may occur. If this happens please use a

The LINDY LCD KVM Terminal Basic is not designed

WEEE (Waste of Electrical and Electronic Equipment), Recycling of Products

introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic

equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must e

nter the

ach individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please

follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from

your national

1 2 3 4

Commentaires sur ces manuels

Pas de commentaire

Lindy 21733 Guide d'installation Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Consoles en rack Lindy 21733